Petronas HTO 32 Heat Transfer Oil
|Packaging Size||210 Litre|
|Density||0.865 kg/l @ 15 degree C|
|Kinematic Viscosity at 40 degree C||30 cSt|
|Kinematic Viscosity at 100 degree C||5.15 cSt|
|Pour Point||-12 degree C|
|Flash Point||210 degree C|
are straight mineral oils used for process, lubrication, heat transfer and quenching type applications. They are high viscosity index paraffinic base oils with good chemical stability, natural oxidation resistance at high operating temperatures and a low pour point which makes them suitable for outdoor and low temperature uses.Features and Benefits:
- Straight mineral composition.
- Low lubricant cost in wasteful conditions.
- Good oxidation resistance and chemical stability.
- Petronas HTO 22 and 32 oils are recommended for use as general purpose lubricants in equipment operating under lightly loaded or wasteful conditions, e.g. as a flushing oil for cleaning out circulation systems and oil reservoirs during oil change-over procedures. Typical applications include conveyors, chains, and outdoor machinery. Petronas HTO 22 and 32 oils are used as heat exchanger medium in closed systems operating at temperatures up to 300 °C. Heat sources should apply heat gradually while oil is circulating to avoid local overheating, oil cracking and coking of the heater elements. Petronas HTO 22 and 32 are especially suitable for quenching of large numbers of smaller steel parts in a given time. They provide a slow to moderate quenching rate, which results in sufficient hardness without the danger of cracking the material.